1991-1992 Cadillac Fleetwood RWD

First we need to gain access to the Theft Deterrent Controller (TDC).

 

The module is located on the mounting bracket  right of the brake pedal.

 

 

Unplug the theft deterrent controller and Connect the Pro bypass Module as follows.

 

 

If the enclosure of your NEWROCKIES PRO Module is green and blue, please setup the switches as following (if enclosure is black, please submit a request to our support team for correct switch configurations): 

 

Open the NEWROCKIES PRO Module's cover (this will NOT void the warranty) by removing the 2 screws on the bottom. Inside there are 2 sets of switches.

 

Set SW1 (8 switches) as following:

DIP SWITCHES (SW1)
1 2 3 4 5 6 7 8
off off on off on off off on

 

Leave SW2 (10 switches) the way it is. Close the PRO Module's cover.

 

To install the NEWROCKIES PRO Module, connect it as following (the TDC should be left unplugged as it is not needed anymore):

 

PRO Bypass      

Car Wires

RED

Attach to the Pin K, Pink Black

BLK

Attach to Pin A Black

PPL

Attach to Pin E Dark Blue

GRN

unconnected

YEL

unconnected

WHT

unconnected

BRN

unconnected

 

Leave the TDC unplugged

 

 

IMPORTANT: If your car still does not start, please follow the troubleshooting directions for PASSKEY 1/2/3 Systems before contacting our support team. This will make it easier and faster for us to handle your support questions and will enable us to serve you better.

 

The installation is completed.

Have more questions? Submit a request

0 Comments

Article is closed for comments.