2011 Chevrolet Equinox

The factory security functions are managed by the Body Control Module (BCM) where we need to make the connections. The BCM is located under the drivers dash.

ALLDATA Repair - 2011 Chevy Truck Equinox FWD V6-3.0L - Service and Repair // <![CDATA[ function clearRadios(){ $(".radio_group").removeAttr("checked"); } // ]]> // <![CDATA[ var zdPath='http://alldatapro.com/alldata/PRO~V367300246~C48900~R0~OF16~N/0'; var zdUrl='https://alldata.zendesk.com'; // ]]> // <![CDATA[ function postARepair() { var year = $('#year').find("option:selected").attr("text"); var make = $('#make').find("option:selected").attr("text"); var model = $('#model').find("option:selected").attr("text"); var engine = $('#engine').find("option:selected").attr("text"); var location = 'http://alldatapro.com/alldata/PRO~V367300246~C48900~R0~OF15~N/0'; if(!year) {year = 'undefined';} location += '?share=' + true; if (year) location += '&year=' + year; if (make) location += '&make=' + make; if (model) location += '&model=' + model; if (engine) location += '&engine=' + engine; if (engine) location += '&engine=' + engine; window.open(location,'_blank'); } // ]]>

 

 

You will need plug c3 and c4

Plug C3 Light Green

ALLDATA Repair - 2011 Chevy Truck Equinox FWD V6-3.0L - Body Control Module // <![CDATA[ function clearRadios(){ $(".radio_group").removeAttr("checked"); } // ]]> // <![CDATA[ var zdPath='http://alldatapro.com/alldata/PRO~V367300246~C48900~R0~OF16~N/0'; var zdUrl='https://alldata.zendesk.com'; // ]]> // <![CDATA[ function postARepair() { var year = $('#year').find("option:selected").attr("text"); var make = $('#make').find("option:selected").attr("text"); var model = $('#model').find("option:selected").attr("text"); var engine = $('#engine').find("option:selected").attr("text"); var location = 'http://alldatapro.com/alldata/PRO~V367300246~C48900~R0~OF15~N/0'; if(!year) {year = 'undefined';} location += '?share=' + true; if (year) location += '&year=' + year; if (make) location += '&make=' + make; if (model) location += '&model=' + model; if (engine) location += '&engine=' + engine; if (engine) location += '&engine=' + engine; window.open(location,'_blank'); } // ]]>

C4 is Black

ALLDATA Repair - 2011 Chevy Truck Equinox FWD V6-3.0L - Body Control Module // <![CDATA[ function clearRadios(){ $(".radio_group").removeAttr("checked"); } // ]]> // <![CDATA[ var zdPath='http://alldatapro.com/alldata/PRO~V367300246~C48900~R0~OF16~N/0'; var zdUrl='https://alldata.zendesk.com'; // ]]> // <![CDATA[ function postARepair() { var year = $('#year').find("option:selected").attr("text"); var make = $('#make').find("option:selected").attr("text"); var model = $('#model').find("option:selected").attr("text"); var engine = $('#engine').find("option:selected").attr("text"); var location = 'http://alldatapro.com/alldata/PRO~V367300246~C48900~R0~OF15~N/0'; if(!year) {year = 'undefined';} location += '?share=' + true; if (year) location += '&year=' + year; if (make) location += '&make=' + make; if (model) location += '&model=' + model; if (engine) location += '&engine=' + engine; if (engine) location += '&engine=' + engine; window.open(location,'_blank'); } // ]]>

 

 

 

Open the NEWROCKIES PRO Module's cover (this will NOT void the warranty) by removing the 2 screws on the bottom. Inside there are 2 sets of switches

 

Set SW1 (8 switches) as following

 

DIP SWITCHES (SW1)
1 2 3 4 5 6 7 8
off off off on on off off on

Leave SW2 (10 switches) the way it is. Close the PRO Module's cover.

 

To install the NEWROCKIES PRO Module, connect it as following:

Pro Bypass      

Vehicle  Wires

RED

Splice into BROWN wire at the BCM Connector C3 Pin 5

BLK

Splice into BLACK with WHITE stripe wire at the BCM connector C4 Pin 26.

WHT

Splice into PINK wire at the BCM Connector C3 Pin 6

GRN

Unconnected

YEL

Splice into the Pink wire at BCM connector C3 pin 15

BLU

unconnected

BRN

Cut WHITE with a BLACK stripe wire at the BCM connector C3 Pin 22 a couple inches from connector so you have room to connect the brown wire to the wire coming from the connector

 

Relearn Procedure

  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to start the engine, then release the key to ON, vehicle will not start.
  3. Observe the SECURITY telltale. After approximately 10 minutes, the telltale will turn OFF.
  4. Turn OFF the ignition, and wait 5 seconds.
  5. Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes. The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK.
  6. Important: The vehicle learns the password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.
  7. Start the engine. The vehicle has now learned the password.

 

The installation is completed.

Have more questions? Submit a request

0 Comments

Article is closed for comments.